###
### Fri Jul 29 14:53:25 EDT 2005:
### /usr/pkg/bin/bmake bulk-package for pearpc-0.3.1nb1
### Current pkg count: 6 installed packages: digest-20050323 gettext-lib-0.11.5nb4 gmake-3.80nb4 libiconv-1.9.2nb1 libtool-base-1.5.18nb3 pkg_install-info-4.5nb3
###
BULK> Full rebuild in progress...
BULK> Cleaning package pearpc-0.3.1nb1 and pre-requisite packages
===> Cleaning for pearpc-0.3.1nb1
===> Cleaning for x11-links-0.25
BULK> Removing installed packages which are not needed to build pearpc-0.3.1nb1
BULK> Keeping BULK_PREREQ: digest-20050323 (pkgtools/digest)
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r libiconv-1.9.2nb1
Executing `/usr/bin/rm -f /usr/pkg/lib/charset.alias'
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r pkg_install-info-4.5nb3
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r libtool-base-1.5.18nb3
BULK> Installing packages which are required to build pearpc-0.3.1nb1.
BULK> /usr/pkg/sbin/pkg_add -K /var/db/pkg /packages/SunOS-5.8/sparc/All/x11-links-0.25.tgz
BULK> Required package digest-20050323 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (pearpc-0.3.1nb1)
===> Checking for vulnerabilities in pearpc-0.3.1nb1
=> Checksum SHA1 OK for pearpc-0.3.1.tar.bz2.
=> Checksum RMD160 OK for pearpc-0.3.1.tar.bz2.
work -> /pkgobj/emulators/pearpc/work
===> Extracting for pearpc-0.3.1nb1
==========================================================================
The supported build options for this package are:
sdl
You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable. Its current value is shown:
PKG_OPTIONS.pearpc (not defined)
==========================================================================
===> Required installed package x11-links>=0.25: x11-links-0.25 found
===> Patching for pearpc-0.3.1nb1
===> Applying pkgsrc patches for pearpc-0.3.1nb1
=> Fixing configuration file.
===> Overriding tools for pearpc-0.3.1nb1
===> Creating toolchain wrappers for pearpc-0.3.1nb1
===> Configuring for pearpc-0.3.1nb1
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking build system type... sparc-sun-solaris2.8
checking host system type... sparc-sun-solaris2
checking target system type... sparc-sun-solaris2
checking for a BSD-compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking for gawk... /usr/bin/nawk
checking whether make sets $(MAKE)... yes
checking for sparc-sun-solaris2-strip... no
checking for strip... strip
configure: WARNING: configure: warning: solaris2: unknown target OS, assuming POSIX-compatible...
configure: WARNING: *** assuming POSIX OS, we need pthread
checking for sparc-sun-solaris2-ranlib... no
checking for ranlib... ranlib
checking for gmake... no
checking for make... /pkgobj/emulators/pearpc/work/.tools/bin/make
checking whether /pkgobj/emulators/pearpc/work/.tools/bin/make sets $(MAKE)... yes
checking for sparc-sun-solaris2-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking for cc option to accept ANSI C... none needed
checking for style of include used by /pkgobj/emulators/pearpc/work/.tools/bin/make... GNU
checking dependency style of cc... none
checking for sparc-sun-solaris2-g++... CC
checking whether we are using the GNU C++ compiler... no
checking whether CC accepts -g... yes
checking dependency style of CC... none
checking for flex... no
checking for lex... lex
checking for yywrap in -lfl... no
checking for yywrap in -ll... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... no
checking for bison... no
checking for byacc... no
checking for ar... /usr/ccs/bin/ar
checking for gar... (cached) /usr/ccs/bin/ar
checking how to run the C preprocessor... cc -E
checking for egrep... grep -E
checking for clock_settime in -lrt... yes
checking whether byte ordering is bigendian... yes
checking for X... libraries /usr/openwin/lib, headers /usr/openwin/include
checking whether -R must be followed by a space... no
checking for gethostbyname... no
checking for gethostbyname in -lnsl... yes
checking for connect... no
checking for connect in -lsocket... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for XOpenDisplay in -lX11... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking asm/types.h usability... no
checking asm/types.h presence... no
checking for asm/types.h... no
checking for stdint.h... (cached) no
checking for an ANSI C-conforming const... no
checking for char... no
checking size of char... 0
checking for short... no
checking size of short... 0
checking for int... no
checking size of int... 0
checking for long int... no
checking size of long int... 0
checking for long long... no
checking size of long long... 0
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating scripts/Makefile
config.status: creating src/Makefile
config.status: creating src/cpu/Makefile
config.status: creating src/cpu/cpu_generic/Makefile
config.status: creating src/cpu/cpu_jitc_x86/Makefile
config.status: creating src/debug/Makefile
config.status: creating src/io/Makefile
config.status: creating src/io/3c90x/Makefile
config.status: creating src/io/ide/Makefile
config.status: creating src/io/graphic/Makefile
config.status: creating src/io/rtl8139/Makefile
config.status: creating src/io/prom/Makefile
config.status: creating src/io/prom/fs/Makefile
config.status: creating src/io/prom/fs/hfs/Makefile
config.status: creating src/io/prom/fs/hfsplus/Makefile
config.status: creating src/io/cuda/Makefile
config.status: creating src/io/pci/Makefile
config.status: creating src/io/pic/Makefile
config.status: creating src/io/macio/Makefile
config.status: creating src/io/nvram/Makefile
config.status: creating src/io/usb/Makefile
config.status: creating src/system/Makefile
config.status: creating src/system/arch/Makefile
config.status: creating src/system/arch/x86/Makefile
config.status: creating src/system/arch/generic/Makefile
config.status: creating src/system/osapi/Makefile
config.status: creating src/system/osapi/beos/Makefile
config.status: creating src/system/osapi/posix/Makefile
config.status: creating src/system/osapi/win32/Makefile
config.status: creating src/system/ui/Makefile
config.status: creating src/system/ui/beos/Makefile
config.status: creating src/system/ui/gtk/Makefile
config.status: creating src/system/ui/qt/Makefile
config.status: creating src/system/ui/sdl/Makefile
config.status: creating src/system/ui/win32/Makefile
config.status: creating src/system/ui/x11/Makefile
config.status: creating src/tools/Makefile
config.status: creating config.h
config.status: executing depfiles commands
./configure successful.
================================================================================
Configuration summary
================================================================================
cpu emulation method: cpu_generic
compiled for architecture: generic
compiled for OS-API: posix
compiled for UI system: x11
enable debug: no
enable profiling: no
make release build: yes
omit frame pointer: no
final C compiler flags: -O -I/usr/pkg/include -I/usr/include -Wundef -Wall -fsigned-char -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe
final C++ compiler flags: -O -I/usr/pkg/include -I/usr/include -Wundef -Wall -Woverloaded-virtual -fsigned-char -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe
final linker flags: -L/usr/pkg/lib -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/openwin/lib -Wl,-R/usr/openwin/lib -L/usr/openwin/lib -R/usr/openwin/lib
final linker add: -lpthread -lrt -lX11
================================================================================
===> Building for pearpc-0.3.1nb1
cd . && /bin/ksh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
/pkgobj/emulators/pearpc/work/.tools/bin/make all-recursive
Making all in doc
Making all in src
Making all in cpu
Making all in cpu_generic
source='ppc_alu.cc' object='ppc_alu.o' libtool=no depfile='.deps/ppc_alu.Po' tmpdepfile='.deps/ppc_alu.TPo' depmode=none /bin/ksh ../../../depcomp CC -DHAVE_CONFIG_H -I. -I. -I../../.. -I../.. -I/usr/pkg/include -I/usr/include -O -I/usr/pkg/include -I/usr/include -Wundef -Wall -Woverloaded-virtual -fsigned-char -O2 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -c -o ppc_alu.o ppc_alu.cc
CC: Warning: Option -fsigned-char passed to ld, if ld is invoked, ignored otherwise
CC: Warning: -xO2 overwrites previously set optimization level of -O3
CC: Warning: Option -pipe passed to ld, if ld is invoked, ignored otherwise
"../../system/types.h", line 57: Error: #error "you're not using the GNU C compiler :-( please add the macros and conditionals for your compiler".
*** Error code 1
Stop.
make: stopped in /pkgobj/emulators/pearpc/work/pearpc-0.3.1/src/cpu/cpu_generic
*** Error code 1
Stop.
make: stopped in /pkgobj/emulators/pearpc/work/pearpc-0.3.1/src/cpu
*** Error code 1
Stop.
make: stopped in /pkgobj/emulators/pearpc/work/pearpc-0.3.1/src
*** Error code 1
Stop.
make: stopped in /pkgobj/emulators/pearpc/work/pearpc-0.3.1
*** Error code 1
Stop.
bmake: stopped in /pkgobj/emulators/pearpc/work/pearpc-0.3.1
*** Error code 1
Stop.
bmake: stopped in /usr/pkgsrc/emulators/pearpc
===>
===> There was an error during the ``build'' phase.
===> Please investigate the following for more information:
===> * log of the build
===> * /pkgobj/emulators/pearpc/work/.work.log
===>
*** Error code 1
Stop.
bmake: stopped in /usr/pkgsrc/emulators/pearpc
Please view the work log for pearpc-0.3.1nb1
BULK> pearpc-0.3.1nb1 was marked as broken: -rw-r--r-- 1 root other 10849 Jul 29 14:56 .broken.html /usr/pkg/bin/bmake deinstall ===> Deinstalling for pearpc BULK> Marking all packages which depend upon pearpc-0.3.1nb1 as broken: BULK> Build for pearpc-0.3.1nb1 was not successful, aborting.