.TH POWERMUST 8 "Fri May 14 2004" "" "Network UPS Tools (NUT)" 
.SH NAME  
powermust \(hy Driver for Mustek PowerMust series UPS equipment
.SH NOTE
This man page only documents the hardware\(hyspecific features of the
powermust driver. For information about the core driver, see  
\fBnutupsdrv\fR(8).

.SH SUPPORTED HARDWARE
The powermust driver is known to work with the following UPSes:

    Mustek PowerMust 400VA Plus (12V)
    Mustek PowerMust 600VA Plus (12V)
    Mustek PowerMust 800VA Pro (12V)
    Mustek PowerMust 1000VA Plus (24V)
    OnLite AQUA 50 (12V)

It may also work with other UPSes in the PowerMust series, but they
haven't been tested.

.SH EXTRA ARGUMENTS

This driver does not support any extra settings in the    
\fBups.conf\fR(5).

.SH UPS COMMANDS

This driver supports some extra commands (see \fBupscmd\fR(8)):

.IP shutdown.return
Turn off the load and return when power is back

.IP shutdown.stayoff
Turn off the load and remain off

.IP shutdown.stop
Stop a shutdown in progress

.IP load.on
Turn on the load immediately

.IP load.off
Turn off the load immediately

.IP reset.input.minmax
Reset minimum and maximum input voltage status

.SH USER VARIABLES

The behavior of the driver can be controlled by some user definable
variables (see \fBupsrw\fR(8)):

.IP ups.delay.shutdown
Interval to wait after shutdown with delay command (seconds)

.IP ups.delay.start
Interval to wait before (re)starting the load (seconds)

.SH BUGS

No known bugs at the moment.

.SH AUTHOR
Carlos Rodrigues <carlos.efr@mail.telepac.pt>

.SH SEE ALSO

.SS The core driver:
\fBnutupsdrv\fR(8)

.SS Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/