/* Definitions of target machine for GNU compiler. NEC V850 series Copyright (C) 1996-2020 Free Software Foundation, Inc. Contributed by Jeff Law (law@cygnus.com). This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. Under Section 7 of GPL version 3, you are granted additional permissions described in the GCC Runtime Library Exception, version 3.1, as published by the Free Software Foundation. You should have received a copy of the GNU General Public License and a copy of the GCC Runtime Library Exception along with this program; see the files COPYING3 and COPYING.RUNTIME respectively. If not, see . */ #ifndef GCC_V850_H #define GCC_V850_H #undef LIB_SPEC #define LIB_SPEC "%{!shared:%{!symbolic:--start-group -lc -lgcc --end-group}}" #undef ENDFILE_SPEC #undef LINK_SPEC #undef STARTFILE_SPEC #undef ASM_SPEC #define TARGET_CPU_generic 1 #define TARGET_CPU_v850e 2 #define TARGET_CPU_v850e1 3 #define TARGET_CPU_v850e2 4 #define TARGET_CPU_v850e2v3 5 #define TARGET_CPU_v850e3v5 6 #ifndef TARGET_CPU_DEFAULT #define TARGET_CPU_DEFAULT TARGET_CPU_generic #endif #define MASK_DEFAULT MASK_V850 #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850}" #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850__}" /* Choose which processor will be the default. We must pass a -mv850xx option to the assembler if no explicit -mv* option is given, because the assembler's processor default may not be correct. */ #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e__}" #endif #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e1 #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E /* No practical difference. */ #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e1}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e1__} %{mv850e1:-D__v850e1__}" #endif #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e2 #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E2 #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e2}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e2__} %{mv850e2:-D__v850e2__}" #endif #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e2v3 #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E2V3 #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e2v3}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e2v3__} %{mv850e2v3:-D__v850e2v3__}" #endif #if TARGET_CPU_DEFAULT == TARGET_CPU_v850e3v5 #undef MASK_DEFAULT #define MASK_DEFAULT MASK_V850E3V5 #undef SUBTARGET_ASM_SPEC #define SUBTARGET_ASM_SPEC "%{!mv*:-mv850e3v5}" #undef SUBTARGET_CPP_SPEC #define SUBTARGET_CPP_SPEC "%{!mv*:-D__v850e3v5__} %{mv850e3v5:-D__v850e3v5__}" #undef TARGET_VERSION #define TARGET_VERSION fprintf (stderr, " (Renesas V850E3V5)"); #endif #define TARGET_V850E3V5_UP ((TARGET_V850E3V5)) #define TARGET_V850E2V3_UP ((TARGET_V850E2V3) || TARGET_V850E3V5_UP) #define TARGET_V850E2_UP ((TARGET_V850E2) || TARGET_V850E2V3_UP) #define TARGET_V850E_UP ((TARGET_V850E) || TARGET_V850E2_UP) #define TARGET_ALL ((TARGET_V850) || TARGET_V850E_UP) #define ASM_SPEC "%{m850es:-mv850e1}%{!mv850es:%{mv*:-mv%*}} \ %{mrelax:-mrelax} \ %{m8byte-align:-m8byte-align} \ %{msoft-float:-msoft-float} \ %{mhard-float:-mhard-float} \ %{mgcc-abi:-mgcc-abi}" #define LINK_SPEC "%{mgcc-abi:-m v850}" #define CPP_SPEC "\ %{mv850e3v5:-D__v850e3v5__} \ %{mv850e2v3:-D__v850e2v3__} \ %{mv850e2:-D__v850e2__} \ %{mv850es:-D__v850e1__} \ %{mv850e1:-D__v850e1__} \ %{mv850e:-D__v850e__} \ %{mv850:-D__v850__} \ %(subtarget_cpp_spec) \ %{mep:-D__EP__}" #define EXTRA_SPECS \ { "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \ { "subtarget_cpp_spec", SUBTARGET_CPP_SPEC } /* Macro to decide when FPU instructions can be used. */ #define TARGET_USE_FPU (TARGET_V850E2V3_UP && ! TARGET_SOFT_FLOAT) #define TARGET_CPU_CPP_BUILTINS() \ do \ { \ builtin_define( "__v851__" ); \ builtin_define( "__v850" ); \ builtin_define( "__v850__" ); \ builtin_assert( "machine=v850" ); \ builtin_assert( "cpu=v850" ); \ if (TARGET_EP) \ builtin_define ("__EP__"); \ if (TARGET_GCC_ABI) \ builtin_define ("__V850_GCC_ABI__"); \ else \ builtin_define ("__V850_RH850_ABI__"); \ if (! TARGET_DISABLE_CALLT) \ builtin_define ("__V850_CALLT__"); \ if (TARGET_8BYTE_ALIGN) \ builtin_define ("__V850_8BYTE_ALIGN__");\ builtin_define (TARGET_USE_FPU ? \ "__FPU_OK__" : "__NO_FPU__");\ } \ while(0) #define MASK_CPU (MASK_V850 | MASK_V850E | MASK_V850E1 | MASK_V850E2 | MASK_V850E2V3 | MASK_V850E3V5) /* Target machine storage layout */ /* Define this if most significant bit is lowest numbered in instructions that operate on numbered bit-fields. This is not true on the NEC V850. */ #define BITS_BIG_ENDIAN 0 /* Define this if most significant byte of a word is the lowest numbered. */ /* This is not true on the NEC V850. */ #define BYTES_BIG_ENDIAN 0 /* Define this if most significant word of a multiword number is lowest numbered. This is not true on the NEC V850. */ #define WORDS_BIG_ENDIAN 0 /* Width of a word, in units (bytes). */ #define UNITS_PER_WORD 4 /* Define this macro if it is advisable to hold scalars in registers in a wider mode than that declared by the program. In such cases, the value is constrained to be within the bounds of the declared type, but kept valid in the wider mode. The signedness of the extension may differ from that of the type. Some simple experiments have shown that leaving UNSIGNEDP alone generates the best overall code. */ #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \ if (GET_MODE_CLASS (MODE) == MODE_INT \ && GET_MODE_SIZE (MODE) < 4) \ { (MODE) = SImode; } /* Allocation boundary (in *bits*) for storing arguments in argument list. */ #define PARM_BOUNDARY 32 /* The stack goes in 32-bit lumps. */ #define STACK_BOUNDARY BIGGEST_ALIGNMENT /* Allocation boundary (in *bits*) for the code of a function. 16 is the minimum boundary; 32 would give better performance. */ #define FUNCTION_BOUNDARY (((! TARGET_GCC_ABI) || optimize_size) ? 16 : 32) /* No data type wants to be aligned rounder than this. */ #define BIGGEST_ALIGNMENT (TARGET_8BYTE_ALIGN ? 64 : 32) /* Alignment of field after `int : 0' in a structure. */ #define EMPTY_FIELD_BOUNDARY 32 /* No structure field wants to be aligned rounder than this. */ #define BIGGEST_FIELD_ALIGNMENT BIGGEST_ALIGNMENT /* Define this if move instructions will actually fail to work when given unaligned data. */ #define STRICT_ALIGNMENT (!TARGET_NO_STRICT_ALIGN) /* Define this as 1 if `char' should by default be signed; else as 0. On the NEC V850, loads do sign extension, so make this default. */ #define DEFAULT_SIGNED_CHAR 1 #undef SIZE_TYPE #define SIZE_TYPE "unsigned int" #undef PTRDIFF_TYPE #define PTRDIFF_TYPE "int" #undef WCHAR_TYPE #define WCHAR_TYPE "long int" #undef WCHAR_TYPE_SIZE #define WCHAR_TYPE_SIZE BITS_PER_WORD /* Standard register usage. */ /* Number of actual hardware registers. The hardware registers are assigned numbers for the compiler from 0 to just below FIRST_PSEUDO_REGISTER. All registers that the compiler knows about must be given numbers, even those that are not normally considered general registers. */ #define FIRST_PSEUDO_REGISTER 36 /* 1 for registers that have pervasive standard uses and are not available for the register allocator. */ #define FIXED_REGISTERS \ { 1, 1, 1, 1, 1, 1, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 1, 0, \ 1, 1, \ 1, 1} /* 1 for registers not available across function calls. These must include the FIXED_REGISTERS and also any registers that can be used without being saved. The latter must include the registers where values are returned and the register where structure-value addresses are passed. Aside from that, you can include as many other registers as you like. */ #define CALL_USED_REGISTERS \ { 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 1, 1, \ 1, 1, \ 1, 1} /* List the order in which to allocate registers. Each register must be listed once, even those in FIXED_REGISTERS. On the 850, we make the return registers first, then all of the volatile registers, then the saved registers in reverse order to better save the registers with an out of line function, and finally the fixed registers. */ #define REG_ALLOC_ORDER \ { \ 10, 11, /* return registers */ \ 12, 13, 14, 15, 16, 17, 18, 19, /* scratch registers */ \ 6, 7, 8, 9, 31, /* argument registers */ \ 29, 28, 27, 26, 25, 24, 23, 22, /* saved registers */ \ 21, 20, 2, \ 0, 1, 3, 4, 5, 30, 32, 33, /* fixed registers */ \ 34, 35 \ } /* Define the classes of registers for register constraints in the machine description. Also define ranges of constants. One of the classes must always be named ALL_REGS and include all hard regs. If there is more than one class, another class must be named NO_REGS and contain no registers. The name GENERAL_REGS must be the name of a class (or an alias for another name such as ALL_REGS). This is the class of registers that is allowed by "g" or "r" in a register constraint. Also, registers outside this class are allocated only when instructions express preferences for them. The classes must be numbered in nondecreasing order; that is, a larger-numbered class must never be contained completely in a smaller-numbered class. For any two classes, it is very desirable that there be another class that represents their union. */ enum reg_class { NO_REGS, EVEN_REGS, GENERAL_REGS, ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int) LIM_REG_CLASSES /* Give names of register classes as strings for dump file. */ #define REG_CLASS_NAMES \ { "NO_REGS", "EVEN_REGS", "GENERAL_REGS", "ALL_REGS", "LIM_REGS" } /* Define which registers fit in which classes. This is an initializer for a vector of HARD_REG_SET of length N_REG_CLASSES. */ #define REG_CLASS_CONTENTS \ { \ { 0x00000000,0x0 }, /* NO_REGS */ \ { 0x55555554,0x0 }, /* EVEN_REGS */ \ { 0xfffffffe,0x0 }, /* GENERAL_REGS */ \ { 0xffffffff,0x0 }, /* ALL_REGS */ \ } /* The same information, inverted: Return the class number of the smallest class containing reg number REGNO. This could be a conditional expression or could index an array. */ #define REGNO_REG_CLASS(REGNO) ((REGNO == CC_REGNUM || REGNO == FCC_REGNUM) ? NO_REGS : GENERAL_REGS) /* The class value for index registers, and the one for base regs. */ #define INDEX_REG_CLASS NO_REGS #define BASE_REG_CLASS GENERAL_REGS /* Macros to check register numbers against specific register classes. */ /* These assume that REGNO is a hard or pseudo reg number. They give nonzero only if REGNO is a hard reg of the suitable class or a pseudo reg currently allocated to a suitable hard reg. Since they use reg_renumber, they are safe only once reg_renumber has been allocated, which happens in reginfo.c during register allocation. */ #define REGNO_OK_FOR_BASE_P(regno) \ (((regno) < FIRST_PSEUDO_REGISTER \ && (regno) != CC_REGNUM \ && (regno) != FCC_REGNUM) \ || reg_renumber[regno] >= 0) #define REGNO_OK_FOR_INDEX_P(regno) 0 /* Convenience wrappers around insn_const_int_ok_for_constraint. */ #define CONST_OK_FOR_I(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_I) #define CONST_OK_FOR_J(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_J) #define CONST_OK_FOR_K(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_K) #define CONST_OK_FOR_L(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_L) #define CONST_OK_FOR_M(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_M) #define CONST_OK_FOR_N(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_N) #define CONST_OK_FOR_O(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_O) #define CONST_OK_FOR_W(VALUE) \ insn_const_int_ok_for_constraint (VALUE, CONSTRAINT_W) /* Stack layout; function entry, exit and calling. */ /* Define this if pushing a word on the stack makes the stack pointer a smaller address. */ #define STACK_GROWS_DOWNWARD 1 /* Define this to nonzero if the nominal address of the stack frame is at the high-address end of the local variables; that is, each additional local variable allocated goes at a more negative offset in the frame. */ #define FRAME_GROWS_DOWNWARD 1 /* Offset of first parameter from the argument pointer register value. */ /* Is equal to the size of the saved fp + pc, even if an fp isn't saved since the value is used before we know. */ #define FIRST_PARM_OFFSET(FNDECL) 0 /* Specify the registers used for certain standard purposes. The values of these macros are register numbers. */ /* Register to use for pushing function arguments. */ #define STACK_POINTER_REGNUM SP_REGNUM /* Base register for access to local variables of the function. */ #define FRAME_POINTER_REGNUM 34 /* Register containing return address from latest function call. */ #define LINK_POINTER_REGNUM LP_REGNUM /* On some machines the offset between the frame pointer and starting offset of the automatic variables is not known until after register allocation has been done (for example, because the saved registers are between these two locations). On those machines, define `FRAME_POINTER_REGNUM' the number of a special, fixed register to be used internally until the offset is known, and define `HARD_FRAME_POINTER_REGNUM' to be actual the hard register number used for the frame pointer. You should define this macro only in the very rare circumstances when it is not possible to calculate the offset between the frame pointer and the automatic variables until after register allocation has been completed. When this macro is defined, you must also indicate in your definition of `ELIMINABLE_REGS' how to eliminate `FRAME_POINTER_REGNUM' into either `HARD_FRAME_POINTER_REGNUM' or `STACK_POINTER_REGNUM'. Do not define this macro if it would be the same as `FRAME_POINTER_REGNUM'. */ #undef HARD_FRAME_POINTER_REGNUM #define HARD_FRAME_POINTER_REGNUM 29 /* Base register for access to arguments of the function. */ #define ARG_POINTER_REGNUM 35 /* Register in which static-chain is passed to a function. This must be a call used register. */ #define STATIC_CHAIN_REGNUM 19 /* If defined, this macro specifies a table of register pairs used to eliminate unneeded registers that point into the stack frame. If it is not defined, the only elimination attempted by the compiler is to replace references to the frame pointer with references to the stack pointer. The definition of this macro is a list of structure initializations, each of which specifies an original and replacement register. On some machines, the position of the argument pointer is not known until the compilation is completed. In such a case, a separate hard register must be used for the argument pointer. This register can be eliminated by replacing it with either the frame pointer or the argument pointer, depending on whether or not the frame pointer has been eliminated. In this case, you might specify: #define ELIMINABLE_REGS \ {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} Note that the elimination of the argument pointer with the stack pointer is specified first since that is the preferred elimination. */ #define ELIMINABLE_REGS \ {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }, \ { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM }} \ /* This macro returns the initial difference between the specified pair of registers. */ #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ { \ if ((FROM) == FRAME_POINTER_REGNUM) \ (OFFSET) = get_frame_size () + crtl->outgoing_args_size; \ else if ((FROM) == ARG_POINTER_REGNUM) \ (OFFSET) = compute_frame_size (get_frame_size (), (long *)0); \ else \ gcc_unreachable (); \ } /* Keep the stack pointer constant throughout the function. */ #define ACCUMULATE_OUTGOING_ARGS 1 #define RETURN_ADDR_RTX(COUNT, FP) v850_return_addr (COUNT) /* Define a data type for recording info about an argument list during the scan of that argument list. This data type should hold all necessary information about the function itself and about the args processed so far, enough to enable macros such as FUNCTION_ARG to determine where the next arg should go. */ #define CUMULATIVE_ARGS struct cum_arg struct cum_arg { int nbytes; }; /* Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. */ #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ do { (CUM).nbytes = 0; } while (0) /* When a parameter is passed in a register, stack space is still allocated for it. */ #define REG_PARM_STACK_SPACE(DECL) 0 /* 1 if N is a possible register number for function argument passing. */ #define FUNCTION_ARG_REGNO_P(N) (N >= 6 && N <= 9) #define DEFAULT_PCC_STRUCT_RETURN 0 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, the stack pointer does not matter. The value is tested only in functions that have frame pointers. No definition is equivalent to always zero. */ #define EXIT_IGNORE_STACK 1 /* Define this macro as a C expression that is nonzero for registers used by the epilogue or the `return' pattern. */ #define EPILOGUE_USES(REGNO) \ (reload_completed && (REGNO) == LINK_POINTER_REGNUM) /* Output assembler code to FILE to increment profiler label # LABELNO for profiling a function entry. */ #define FUNCTION_PROFILER(FILE, LABELNO) ; /* Length in units of the trampoline for entering a nested function. */ #define TRAMPOLINE_SIZE 24 /* Addressing modes, and classification of registers for them. */ /* 1 if X is an rtx for a constant that is a valid address. */ /* ??? This seems too exclusive. May get better code by accepting more possibilities here, in particular, should accept ZDA_NAME SYMBOL_REFs. */ #define CONSTANT_ADDRESS_P(X) constraint_satisfied_p (X, CONSTRAINT_K) /* Maximum number of registers that can appear in a valid memory address. */ #define MAX_REGS_PER_ADDRESS 1 /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE, return the mode to be used for the comparison. For floating-point equality comparisons, CCFPEQmode should be used. VOIDmode should be used in all other cases. For integer comparisons against zero, reduce to CCNOmode or CCZmode if possible, to allow for more combinations. */ #define SELECT_CC_MODE(OP, X, Y) v850_select_cc_mode (OP, X, Y) /* Nonzero if access to memory by bytes or half words is no faster than accessing full words. */ #define SLOW_BYTE_ACCESS 1 /* According expr.c, a value of around 6 should minimize code size, and for the V850 series, that's our primary concern. */ #define MOVE_RATIO(speed) 6 /* Indirect calls are expensive, never turn a direct call into an indirect call. */ #define NO_FUNCTION_CSE 1 /* The four different data regions on the v850. */ typedef enum { DATA_AREA_NORMAL, DATA_AREA_SDA, DATA_AREA_TDA, DATA_AREA_ZDA } v850_data_area; #define TEXT_SECTION_ASM_OP "\t.section .text" #define DATA_SECTION_ASM_OP "\t.section .data" #define BSS_SECTION_ASM_OP "\t.section .bss" #define SDATA_SECTION_ASM_OP "\t.section .sdata,\"aw\"" #define SBSS_SECTION_ASM_OP "\t.section .sbss,\"aw\"" #define SCOMMON_ASM_OP "\t.scomm\t" #define ZCOMMON_ASM_OP "\t.zcomm\t" #define TCOMMON_ASM_OP "\t.tcomm\t" #define ASM_COMMENT_START "#" /* Output to assembler file text saying following lines may contain character constants, extra white space, comments, etc. */ #define ASM_APP_ON "#APP\n" /* Output to assembler file text saying following lines no longer contain unusual constructs. */ #define ASM_APP_OFF "#NO_APP\n" #undef USER_LABEL_PREFIX #define USER_LABEL_PREFIX "_" /* This says how to output the assembler to define a global uninitialized but not common symbol. */ #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ asm_output_aligned_bss ((FILE), (DECL), (NAME), (SIZE), (ALIGN)) #undef ASM_OUTPUT_ALIGNED_BSS #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN) /* This says how to output the assembler to define a global uninitialized, common symbol. */ #undef ASM_OUTPUT_ALIGNED_COMMON #undef ASM_OUTPUT_COMMON #define ASM_OUTPUT_ALIGNED_DECL_COMMON(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_common (FILE, DECL, NAME, SIZE, ALIGN) /* This says how to output the assembler to define a local uninitialized symbol. */ #undef ASM_OUTPUT_ALIGNED_LOCAL #undef ASM_OUTPUT_LOCAL #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN) \ v850_output_local (FILE, DECL, NAME, SIZE, ALIGN) /* Globalizing directive for a label. */ #define GLOBAL_ASM_OP "\t.global " #define ASM_PN_FORMAT "%s___%lu" /* This is how we tell the assembler that two symbols have the same value. */ #define ASM_OUTPUT_DEF(FILE,NAME1,NAME2) \ do { assemble_name(FILE, NAME1); \ fputs(" = ", FILE); \ assemble_name(FILE, NAME2); \ fputc('\n', FILE); } while (0) /* How to refer to registers in assembler output. This sequence is indexed by compiler's hard-register-number (see above). */ #define REGISTER_NAMES \ { "r0", "r1", "r2", "sp", "gp", "r5", "r6" , "r7", \ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ "r24", "r25", "r26", "r27", "r28", "r29", "ep", "r31", \ "psw", "fcc", \ ".fp", ".ap"} /* Register numbers */ #define ADDITIONAL_REGISTER_NAMES \ { { "zero", ZERO_REGNUM }, \ { "hp", 2 }, \ { "r3", 3 }, \ { "r4", 4 }, \ { "tp", 5 }, \ { "fp", 29 }, \ { "r30", 30 }, \ { "lp", LP_REGNUM} } /* This is how to output an element of a case-vector that is absolute. */ #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ fprintf (FILE, "\t%s .L%d\n", \ (TARGET_BIG_SWITCH ? ".long" : ".short"), VALUE) /* This is how to output an element of a case-vector that is relative. */ /* Disable the shift, which is for the currently disabled "switch" opcode. Se casesi in v850.md. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ fprintf (FILE, "\t%s %s.L%d-.L%d%s\n", \ (TARGET_BIG_SWITCH ? ".long" : ".short"), \ (0 && ! TARGET_BIG_SWITCH && (TARGET_V850E_UP) ? "(" : ""), \ VALUE, REL, \ (0 && ! TARGET_BIG_SWITCH && (TARGET_V850E_UP) ? ")>>1" : "")) #define ASM_OUTPUT_ALIGN(FILE, LOG) \ if ((LOG) != 0) \ fprintf (FILE, "\t.align %d\n", (LOG)) /* We don't have to worry about dbx compatibility for the v850. */ #define DEFAULT_GDB_EXTENSIONS 1 /* Use dwarf2 debugging info by default. */ #undef PREFERRED_DEBUGGING_TYPE #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG #define DWARF2_FRAME_INFO 1 #define DWARF2_UNWIND_INFO 0 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LINK_POINTER_REGNUM) #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LINK_POINTER_REGNUM) #ifndef ASM_GENERATE_INTERNAL_LABEL #define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM) \ sprintf (STRING, "*.%s%u", PREFIX, (unsigned int)(NUM)) #endif /* Specify the machine mode that this machine uses for the index in the tablejump instruction. */ #define CASE_VECTOR_MODE (TARGET_BIG_SWITCH ? SImode : HImode) /* Define as C expression which evaluates to nonzero if the tablejump instruction expects the table to contain offsets from the address of the table. Do not define this if the table should contain absolute addresses. */ #define CASE_VECTOR_PC_RELATIVE 1 /* The switch instruction requires that the jump table immediately follow it. */ #define JUMP_TABLES_IN_TEXT_SECTION (!TARGET_JUMP_TABLES_IN_DATA_SECTION) #undef ASM_OUTPUT_BEFORE_CASE_LABEL #define ASM_OUTPUT_BEFORE_CASE_LABEL(FILE,PREFIX,NUM,TABLE) \ ASM_OUTPUT_ALIGN ((FILE), (TARGET_BIG_SWITCH ? 2 : 1)) #define WORD_REGISTER_OPERATIONS 1 /* Byte and short loads sign extend the value to a word. */ #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND /* Max number of bytes we can move from memory to memory in one reasonably fast instruction. */ #define MOVE_MAX 4 /* Define if shifts truncate the shift count which implies one can omit a sign-extension or zero-extension of a shift count. */ #define SHIFT_COUNT_TRUNCATED 1 /* Specify the machine mode that pointers have. After generation of rtl, the compiler makes no further distinction between pointers and any other objects of this machine mode. */ #define Pmode SImode /* A function address in a call instruction is a byte address (for indexing purposes) so give the MEM rtx a byte's mode. */ #define FUNCTION_MODE QImode /* Tell compiler we want to support GHS pragmas */ #define REGISTER_TARGET_PRAGMAS() do { \ c_register_pragma ("ghs", "interrupt", ghs_pragma_interrupt); \ c_register_pragma ("ghs", "section", ghs_pragma_section); \ c_register_pragma ("ghs", "starttda", ghs_pragma_starttda); \ c_register_pragma ("ghs", "startsda", ghs_pragma_startsda); \ c_register_pragma ("ghs", "startzda", ghs_pragma_startzda); \ c_register_pragma ("ghs", "endtda", ghs_pragma_endtda); \ c_register_pragma ("ghs", "endsda", ghs_pragma_endsda); \ c_register_pragma ("ghs", "endzda", ghs_pragma_endzda); \ } while (0) /* enum GHS_SECTION_KIND is an enumeration of the kinds of sections that can appear in the "ghs section" pragma. These names are used to index into the GHS_default_section_names[] and GHS_current_section_names[] that are defined in v850.c, and so the ordering of each must remain consistent. These arrays give the default and current names for each kind of section defined by the GHS pragmas. The current names can be changed by the "ghs section" pragma. If the current names are null, use the default names. Note that the two arrays have different types. For the *normal* section kinds (like .data, .text, etc.) we do not want to explicitly force the name of these sections, but would rather let the linker (or at least the back end) choose the name of the section, UNLESS the user has forced a specific name for these section kinds. To accomplish this set the name in ghs_default_section_names to null. */ enum GHS_section_kind { GHS_SECTION_KIND_DEFAULT, GHS_SECTION_KIND_TEXT, GHS_SECTION_KIND_DATA, GHS_SECTION_KIND_RODATA, GHS_SECTION_KIND_BSS, GHS_SECTION_KIND_SDATA, GHS_SECTION_KIND_ROSDATA, GHS_SECTION_KIND_TDATA, GHS_SECTION_KIND_ZDATA, GHS_SECTION_KIND_ROZDATA, COUNT_OF_GHS_SECTION_KINDS /* must be last */ }; /* The following code is for handling pragmas supported by the v850 compiler produced by Green Hills Software. This is at the specific request of a customer. */ typedef struct data_area_stack_element { struct data_area_stack_element * prev; v850_data_area data_area; /* Current default data area. */ } data_area_stack_element; /* Track the current data area set by the data area pragma (which can be nested). */ extern data_area_stack_element * data_area_stack; /* Names of the various data areas used on the v850. */ extern const char * GHS_default_section_names [(int) COUNT_OF_GHS_SECTION_KINDS]; extern const char * GHS_current_section_names [(int) COUNT_OF_GHS_SECTION_KINDS]; /* The assembler op to start the file. */ #define FILE_ASM_OP "\t.file\n" /* Implement ZDA, TDA, and SDA */ #define EP_REGNUM 30 /* ep register number */ #define SYMBOL_FLAG_ZDA (SYMBOL_FLAG_MACH_DEP << 0) #define SYMBOL_FLAG_TDA (SYMBOL_FLAG_MACH_DEP << 1) #define SYMBOL_FLAG_SDA (SYMBOL_FLAG_MACH_DEP << 2) #define SYMBOL_REF_ZDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_ZDA) != 0) #define SYMBOL_REF_TDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_TDA) != 0) #define SYMBOL_REF_SDA_P(X) ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_SDA) != 0) #define TARGET_ASM_INIT_SECTIONS v850_asm_init_sections #define ADJUST_INSN_LENGTH(INSN, LENGTH) \ ((LENGTH) = v850_adjust_insn_length ((INSN), (LENGTH))) #endif /* ! GCC_V850_H */