/* Definitions of x86 tunable features. Copyright (C) 2013-2020 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License and a copy of the GCC Runtime Library Exception along with this program; see the files COPYING3 and COPYING.RUNTIME respectively. If not, see . */ /* Tuning for a given CPU XXXX consists of: - adding new CPU into: - adding PROCESSOR_XXX to processor_type (in i386.h) - possibly adding XXX into CPU attribute in i386.md - adding XXX to processor_alias_table (in i386.c) - introducing ix86_XXX_cost in i386.c - Stringop generation table can be build based on test_stringop - script (once rest of tuning is complete) - designing a scheduler model in - XXXX.md file - Updating ix86_issue_rate and ix86_adjust_cost in i386.md - possibly updating ia32_multipass_dfa_lookahead, ix86_sched_reorder and ix86_sched_init_global if those tricks are needed. - Tunning the flags bellow. Those are split into sections and each section is very roughly ordered by importance. */ /*****************************************************************************/ /* Scheduling flags. */ /*****************************************************************************/ /* X86_TUNE_SCHEDULE: Enable scheduling. */ DEF_TUNE (X86_TUNE_SCHEDULE, "schedule", m_PENT | m_LAKEMONT | m_PPRO | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_INTEL | m_KNL | m_KNM | m_K6_GEODE | m_AMD_MULTIPLE | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC) /* X86_TUNE_PARTIAL_REG_DEPENDENCY: Enable more register renaming on modern chips. Preffer stores affecting whole integer register over partial stores. For example preffer MOVZBL or MOVQ to load 8bit value over movb. */ DEF_TUNE (X86_TUNE_PARTIAL_REG_DEPENDENCY, "partial_reg_dependency", m_P4_NOCONA | m_CORE2 | m_NEHALEM | m_SANDYBRIDGE | m_CORE_AVX2 | m_BONNELL | m_SILVERMONT | m_GOLDMONT | m_GOLDMONT_PLUS | m_INTEL | m_KNL | m_KNM | m_AMD_MULTIPLE | m_TREMONT | m_GENERIC) /* X86_TUNE_SSE_PARTIAL_REG_DEPENDENCY: This knob promotes all store destinations to be 128bit to allow register renaming on 128bit SSE units, but usually results in one extra microop on 64bit SSE units. Experimental results shows that disabling this option on P4 brings over 20% SPECfp regression, while enabling it on K8 brings roughly 2.4% regression that can be partly masked by careful scheduling of moves. */ DEF_TUNE (X86_TUNE_SSE_PARTIAL_REG_DEPENDENCY, "sse_partial_reg_dependency", m_PPRO | m_P4_NOCONA | m_CORE_ALL | m_BONNELL | m_AMDFAM10 | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_SSE_SPLIT_REGS: Set for machines where the type and dependencies are resolved on SSE register parts instead of whole registers, so we may maintain just lower part of scalar values in proper format leaving the upper part undefined. */ DEF_TUNE (X86_TUNE_SSE_SPLIT_REGS, "sse_split_regs", m_ATHLON_K8) /* X86_TUNE_PARTIAL_FLAG_REG_STALL: this flag disables use of flags set by instructions affecting just some flags (in particular shifts). This is because Core2 resolves dependencies on whole flags register and such sequences introduce false dependency on previous instruction setting full flags. The flags does not affect generation of INC and DEC that is controlled by X86_TUNE_USE_INCDEC. */ DEF_TUNE (X86_TUNE_PARTIAL_FLAG_REG_STALL, "partial_flag_reg_stall", m_CORE2) /* X86_TUNE_MOVX: Enable to zero extend integer registers to avoid partial dependencies. */ DEF_TUNE (X86_TUNE_MOVX, "movx", m_PPRO | m_P4_NOCONA | m_CORE2 | m_NEHALEM | m_SANDYBRIDGE | m_BONNELL | m_SILVERMONT | m_GOLDMONT | m_KNL | m_KNM | m_INTEL | m_GOLDMONT_PLUS | m_GEODE | m_AMD_MULTIPLE | m_CORE_AVX2 | m_TREMONT | m_GENERIC) /* X86_TUNE_MEMORY_MISMATCH_STALL: Avoid partial stores that are followed by full sized loads. */ DEF_TUNE (X86_TUNE_MEMORY_MISMATCH_STALL, "memory_mismatch_stall", m_P4_NOCONA | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_INTEL | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_AMD_MULTIPLE | m_TREMONT | m_GENERIC) /* X86_TUNE_FUSE_CMP_AND_BRANCH_32: Fuse compare with a subsequent conditional jump instruction for 32 bit TARGET. */ DEF_TUNE (X86_TUNE_FUSE_CMP_AND_BRANCH_32, "fuse_cmp_and_branch_32", m_CORE_ALL | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_FUSE_CMP_AND_BRANCH_64: Fuse compare with a subsequent conditional jump instruction for TARGET_64BIT. */ DEF_TUNE (X86_TUNE_FUSE_CMP_AND_BRANCH_64, "fuse_cmp_and_branch_64", m_NEHALEM | m_SANDYBRIDGE | m_CORE_AVX2 | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_FUSE_CMP_AND_BRANCH_SOFLAGS: Fuse compare with a subsequent conditional jump instruction when the condition jump check sign flag (SF) or overflow flag (OF). */ DEF_TUNE (X86_TUNE_FUSE_CMP_AND_BRANCH_SOFLAGS, "fuse_cmp_and_branch_soflags", m_NEHALEM | m_SANDYBRIDGE | m_CORE_AVX2 | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_FUSE_ALU_AND_BRANCH: Fuse alu with a subsequent conditional jump instruction when the alu instruction produces the CCFLAG consumed by the conditional jump instruction. */ DEF_TUNE (X86_TUNE_FUSE_ALU_AND_BRANCH, "fuse_alu_and_branch", m_SANDYBRIDGE | m_CORE_AVX2 | m_GENERIC) /*****************************************************************************/ /* Function prologue, epilogue and function calling sequences. */ /*****************************************************************************/ /* X86_TUNE_ACCUMULATE_OUTGOING_ARGS: Allocate stack space for outgoing arguments in prologue/epilogue instead of separately for each call by push/pop instructions. This increase code size by about 5% in 32bit mode, less so in 64bit mode because parameters are passed in registers. It is considerable win for targets without stack engine that prevents multple push operations to happen in parallel. */ DEF_TUNE (X86_TUNE_ACCUMULATE_OUTGOING_ARGS, "accumulate_outgoing_args", m_PPRO | m_P4_NOCONA | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_ATHLON_K8) /* X86_TUNE_PROLOGUE_USING_MOVE: Do not use push/pop in prologues that are considered on critical path. */ DEF_TUNE (X86_TUNE_PROLOGUE_USING_MOVE, "prologue_using_move", m_PPRO | m_ATHLON_K8) /* X86_TUNE_PROLOGUE_USING_MOVE: Do not use push/pop in epilogues that are considered on critical path. */ DEF_TUNE (X86_TUNE_EPILOGUE_USING_MOVE, "epilogue_using_move", m_PPRO | m_ATHLON_K8) /* X86_TUNE_USE_LEAVE: Use "leave" instruction in epilogues where it fits. */ DEF_TUNE (X86_TUNE_USE_LEAVE, "use_leave", m_386 | m_CORE_ALL | m_K6_GEODE | m_AMD_MULTIPLE | m_GENERIC) /* X86_TUNE_PUSH_MEMORY: Enable generation of "push mem" instructions. Some chips, like 486 and Pentium works faster with separate load and push instructions. */ DEF_TUNE (X86_TUNE_PUSH_MEMORY, "push_memory", m_386 | m_P4_NOCONA | m_CORE_ALL | m_K6_GEODE | m_AMD_MULTIPLE | m_GENERIC) /* X86_TUNE_SINGLE_PUSH: Enable if single push insn is preferred over esp subtraction. */ DEF_TUNE (X86_TUNE_SINGLE_PUSH, "single_push", m_386 | m_486 | m_PENT | m_LAKEMONT | m_K6_GEODE) /* X86_TUNE_DOUBLE_PUSH. Enable if double push insn is preferred over esp subtraction. */ DEF_TUNE (X86_TUNE_DOUBLE_PUSH, "double_push", m_PENT | m_LAKEMONT | m_K6_GEODE) /* X86_TUNE_SINGLE_POP: Enable if single pop insn is preferred over esp addition. */ DEF_TUNE (X86_TUNE_SINGLE_POP, "single_pop", m_386 | m_486 | m_PENT | m_LAKEMONT | m_PPRO) /* X86_TUNE_DOUBLE_POP: Enable if double pop insn is preferred over esp addition. */ DEF_TUNE (X86_TUNE_DOUBLE_POP, "double_pop", m_PENT | m_LAKEMONT) /*****************************************************************************/ /* Branch predictor tuning */ /*****************************************************************************/ /* X86_TUNE_PAD_SHORT_FUNCTION: Make every function to be at least 4 instructions long. */ DEF_TUNE (X86_TUNE_PAD_SHORT_FUNCTION, "pad_short_function", m_BONNELL) /* X86_TUNE_PAD_RETURNS: Place NOP before every RET that is a destination of conditional jump or directly preceded by other jump instruction. This is important for AND K8-AMDFAM10 because the branch prediction architecture expect at most one jump per 2 byte window. Failing to pad returns leads to misaligned return stack. */ DEF_TUNE (X86_TUNE_PAD_RETURNS, "pad_returns", m_ATHLON_K8 | m_AMDFAM10) /* X86_TUNE_FOUR_JUMP_LIMIT: Some CPU cores are not able to predict more than 4 branch instructions in the 16 byte window. */ DEF_TUNE (X86_TUNE_FOUR_JUMP_LIMIT, "four_jump_limit", m_PPRO | m_P4_NOCONA | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_INTEL | m_ATHLON_K8 | m_AMDFAM10) /*****************************************************************************/ /* Integer instruction selection tuning */ /*****************************************************************************/ /* X86_TUNE_SOFTWARE_PREFETCHING_BENEFICIAL: Enable software prefetching at -O3. For the moment, the prefetching seems badly tuned for Intel chips. */ DEF_TUNE (X86_TUNE_SOFTWARE_PREFETCHING_BENEFICIAL, "software_prefetching_beneficial", m_K6_GEODE | m_ATHLON_K8 | m_AMDFAM10 | m_BDVER | m_BTVER) /* X86_TUNE_LCP_STALL: Avoid an expensive length-changing prefix stall on 16-bit immediate moves into memory on Core2 and Corei7. */ DEF_TUNE (X86_TUNE_LCP_STALL, "lcp_stall", m_CORE_ALL | m_GENERIC) /* X86_TUNE_READ_MODIFY: Enable use of read-modify instructions such as "add mem, reg". */ DEF_TUNE (X86_TUNE_READ_MODIFY, "read_modify", ~(m_PENT | m_LAKEMONT | m_PPRO)) /* X86_TUNE_USE_INCDEC: Enable use of inc/dec instructions. Core2 and nehalem has stall of 7 cycles for partial flag register stalls. Sandy bridge and Ivy bridge generate extra uop. On Haswell this extra uop is output only when the values needs to be really merged, which is not done by GCC generated code. */ DEF_TUNE (X86_TUNE_USE_INCDEC, "use_incdec", ~(m_P4_NOCONA | m_CORE2 | m_NEHALEM | m_SANDYBRIDGE | m_BONNELL | m_SILVERMONT | m_INTEL | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC)) /* X86_TUNE_INTEGER_DFMODE_MOVES: Enable if integer moves are preferred for DFmode copies */ DEF_TUNE (X86_TUNE_INTEGER_DFMODE_MOVES, "integer_dfmode_moves", ~(m_PPRO | m_P4_NOCONA | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_GEODE | m_AMD_MULTIPLE | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC)) /* X86_TUNE_OPT_AGU: Optimize for Address Generation Unit. This flag will impact LEA instruction selection. */ DEF_TUNE (X86_TUNE_OPT_AGU, "opt_agu", m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_INTEL) /* X86_TUNE_AVOID_LEA_FOR_ADDR: Avoid lea for address computation. */ DEF_TUNE (X86_TUNE_AVOID_LEA_FOR_ADDR, "avoid_lea_for_addr", m_BONNELL | m_SILVERMONT | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_KNL | m_KNM) /* X86_TUNE_SLOW_IMUL_IMM32_MEM: Imul of 32-bit constant and memory is vector path on AMD machines. FIXME: Do we need to enable this for core? */ DEF_TUNE (X86_TUNE_SLOW_IMUL_IMM32_MEM, "slow_imul_imm32_mem", m_K8 | m_AMDFAM10) /* X86_TUNE_SLOW_IMUL_IMM8: Imul of 8-bit constant is vector path on AMD machines. FIXME: Do we need to enable this for core? */ DEF_TUNE (X86_TUNE_SLOW_IMUL_IMM8, "slow_imul_imm8", m_K8 | m_AMDFAM10) /* X86_TUNE_AVOID_MEM_OPND_FOR_CMOVE: Try to avoid memory operands for a conditional move. */ DEF_TUNE (X86_TUNE_AVOID_MEM_OPND_FOR_CMOVE, "avoid_mem_opnd_for_cmove", m_BONNELL | m_SILVERMONT | m_GOLDMONT | m_GOLDMONT_PLUS | m_KNL | m_KNM | m_TREMONT | m_INTEL) /* X86_TUNE_SINGLE_STRINGOP: Enable use of single string operations, such as MOVS and STOS (without a REP prefix) to move/set sequences of bytes. */ DEF_TUNE (X86_TUNE_SINGLE_STRINGOP, "single_stringop", m_386 | m_P4_NOCONA) /* X86_TUNE_MISALIGNED_MOVE_STRING_PRO_EPILOGUES: Enable generation of compact prologues and epilogues by issuing a misaligned moves. This requires target to handle misaligned moves and partial memory stalls reasonably well. FIXME: This may actualy be a win on more targets than listed here. */ DEF_TUNE (X86_TUNE_MISALIGNED_MOVE_STRING_PRO_EPILOGUES, "misaligned_move_string_pro_epilogues", m_386 | m_486 | m_CORE_ALL | m_AMD_MULTIPLE | m_GENERIC) /* X86_TUNE_USE_SAHF: Controls use of SAHF. */ DEF_TUNE (X86_TUNE_USE_SAHF, "use_sahf", m_PPRO | m_P4_NOCONA | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_K6_GEODE | m_K8 | m_AMDFAM10 | m_BDVER | m_BTVER | m_ZNVER | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC) /* X86_TUNE_USE_CLTD: Controls use of CLTD and CTQO instructions. */ DEF_TUNE (X86_TUNE_USE_CLTD, "use_cltd", ~(m_PENT | m_LAKEMONT | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_K6 | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT)) /* X86_TUNE_USE_BT: Enable use of BT (bit test) instructions. */ DEF_TUNE (X86_TUNE_USE_BT, "use_bt", m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_LAKEMONT | m_AMD_MULTIPLE | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC) /* X86_TUNE_AVOID_FALSE_DEP_FOR_BMI: Avoid false dependency for bit-manipulation instructions. */ DEF_TUNE (X86_TUNE_AVOID_FALSE_DEP_FOR_BMI, "avoid_false_dep_for_bmi", m_SANDYBRIDGE | m_CORE_AVX2 | m_GENERIC) /* X86_TUNE_ADJUST_UNROLL: This enables adjusting the unroll factor based on hardware capabilities. Bdver3 hardware has a loop buffer which makes unrolling small loop less important. For, such architectures we adjust the unroll factor so that the unrolled loop fits the loop buffer. */ DEF_TUNE (X86_TUNE_ADJUST_UNROLL, "adjust_unroll_factor", m_BDVER3 | m_BDVER4) /* X86_TUNE_ONE_IF_CONV_INSNS: Restrict a number of cmov insns in if-converted sequence to one. */ DEF_TUNE (X86_TUNE_ONE_IF_CONV_INSN, "one_if_conv_insn", m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_CORE_ALL | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC) /* X86_TUNE_AVOID_MFENCE: Use lock prefixed instructions instead of mfence. */ DEF_TUNE (X86_TUNE_AVOID_MFENCE, "avoid_mfence", m_CORE_ALL | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_EXPAND_ABS: This enables a new abs pattern by generating instructions for abs (x) = (((signed) x >> (W-1) ^ x) - (signed) x >> (W-1)) instead of cmove or SSE max/abs instructions. */ DEF_TUNE (X86_TUNE_EXPAND_ABS, "expand_abs", m_CORE_ALL | m_SILVERMONT | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT ) /*****************************************************************************/ /* 387 instruction selection tuning */ /*****************************************************************************/ /* X86_TUNE_USE_HIMODE_FIOP: Enables use of x87 instructions with 16bit integer operand. FIXME: Why this is disabled for modern chips? */ DEF_TUNE (X86_TUNE_USE_HIMODE_FIOP, "use_himode_fiop", m_386 | m_486 | m_K6_GEODE) /* X86_TUNE_USE_SIMODE_FIOP: Enables use of x87 instructions with 32bit integer operand. */ DEF_TUNE (X86_TUNE_USE_SIMODE_FIOP, "use_simode_fiop", ~(m_PENT | m_LAKEMONT | m_PPRO | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_AMD_MULTIPLE | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC)) /* X86_TUNE_USE_FFREEP: Use freep instruction instead of fstp. */ DEF_TUNE (X86_TUNE_USE_FFREEP, "use_ffreep", m_AMD_MULTIPLE) /* X86_TUNE_EXT_80387_CONSTANTS: Use fancy 80387 constants, such as PI. */ DEF_TUNE (X86_TUNE_EXT_80387_CONSTANTS, "ext_80387_constants", m_PPRO | m_P4_NOCONA | m_CORE_ALL | m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_K6_GEODE | m_ATHLON_K8 | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_GENERIC) /*****************************************************************************/ /* SSE instruction selection tuning */ /*****************************************************************************/ /* X86_TUNE_GENERAL_REGS_SSE_SPILL: Try to spill general regs to SSE regs instead of memory. */ DEF_TUNE (X86_TUNE_GENERAL_REGS_SSE_SPILL, "general_regs_sse_spill", m_CORE_ALL) /* X86_TUNE_SSE_UNALIGNED_LOAD_OPTIMAL: Use movups for misaligned loads instead of a sequence loading registers by parts. */ DEF_TUNE (X86_TUNE_SSE_UNALIGNED_LOAD_OPTIMAL, "sse_unaligned_load_optimal", m_NEHALEM | m_SANDYBRIDGE | m_CORE_AVX2 | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_AMDFAM10 | m_BDVER | m_BTVER | m_ZNVER | m_GENERIC) /* X86_TUNE_SSE_UNALIGNED_STORE_OPTIMAL: Use movups for misaligned stores instead of a sequence loading registers by parts. */ DEF_TUNE (X86_TUNE_SSE_UNALIGNED_STORE_OPTIMAL, "sse_unaligned_store_optimal", m_NEHALEM | m_SANDYBRIDGE | m_CORE_AVX2 | m_SILVERMONT | m_KNL | m_KNM | m_INTEL | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_BDVER | m_ZNVER | m_GENERIC) /* X86_TUNE_SSE_PACKED_SINGLE_INSN_OPTIMAL: Use packed single precision 128bit instructions instead of double where possible. */ DEF_TUNE (X86_TUNE_SSE_PACKED_SINGLE_INSN_OPTIMAL, "sse_packed_single_insn_optimal", m_BDVER | m_ZNVER) /* X86_TUNE_SSE_TYPELESS_STORES: Always movaps/movups for 128bit stores. */ DEF_TUNE (X86_TUNE_SSE_TYPELESS_STORES, "sse_typeless_stores", m_AMD_MULTIPLE | m_CORE_ALL | m_GENERIC) /* X86_TUNE_SSE_LOAD0_BY_PXOR: Always use pxor to load0 as opposed to xorps/xorpd and other variants. */ DEF_TUNE (X86_TUNE_SSE_LOAD0_BY_PXOR, "sse_load0_by_pxor", m_PPRO | m_P4_NOCONA | m_CORE_ALL | m_BDVER | m_BTVER | m_ZNVER | m_GENERIC) /* X86_TUNE_INTER_UNIT_MOVES_TO_VEC: Enable moves in from integer to SSE registers. If disabled, the moves will be done by storing the value to memory and reloading. Enable this flag for generic - the only relevant architecture preferring no inter-unit moves is Buldozer. While this makes small regression on SPECfp scores (sub 0.3%), disabling inter-unit moves penalizes noticeably hand written vectorized code which use i.e. _mm_set_epi16. */ DEF_TUNE (X86_TUNE_INTER_UNIT_MOVES_TO_VEC, "inter_unit_moves_to_vec", ~(m_ATHLON_K8 | m_AMDFAM10 | m_BDVER | m_BTVER)) /* X86_TUNE_INTER_UNIT_MOVES_TO_VEC: Enable moves in from SSE to integer registers. If disabled, the moves will be done by storing the value to memory and reloading. */ DEF_TUNE (X86_TUNE_INTER_UNIT_MOVES_FROM_VEC, "inter_unit_moves_from_vec", ~m_ATHLON_K8) /* X86_TUNE_INTER_UNIT_CONVERSIONS: Enable float<->integer conversions to use both SSE and integer registers at a same time. */ DEF_TUNE (X86_TUNE_INTER_UNIT_CONVERSIONS, "inter_unit_conversions", ~(m_AMDFAM10 | m_BDVER)) /* X86_TUNE_SPLIT_MEM_OPND_FOR_FP_CONVERTS: Try to split memory operand for fp converts to destination register. */ DEF_TUNE (X86_TUNE_SPLIT_MEM_OPND_FOR_FP_CONVERTS, "split_mem_opnd_for_fp_converts", m_SILVERMONT | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_INTEL) /* X86_TUNE_USE_VECTOR_FP_CONVERTS: Prefer vector packed SSE conversion from FP to FP. This form of instructions avoids partial write to the destination. */ DEF_TUNE (X86_TUNE_USE_VECTOR_FP_CONVERTS, "use_vector_fp_converts", m_AMDFAM10) /* X86_TUNE_USE_VECTOR_CONVERTS: Prefer vector packed SSE conversion from integer to FP. */ DEF_TUNE (X86_TUNE_USE_VECTOR_CONVERTS, "use_vector_converts", m_AMDFAM10) /* X86_TUNE_SLOW_SHUFB: Indicates tunings with slow pshufb instruction. */ DEF_TUNE (X86_TUNE_SLOW_PSHUFB, "slow_pshufb", m_BONNELL | m_SILVERMONT | m_KNL | m_KNM | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_INTEL) /* X86_TUNE_AVOID_4BYTE_PREFIXES: Avoid instructions requiring 4+ bytes of prefixes. */ DEF_TUNE (X86_TUNE_AVOID_4BYTE_PREFIXES, "avoid_4byte_prefixes", m_SILVERMONT | m_GOLDMONT | m_GOLDMONT_PLUS | m_TREMONT | m_INTEL) /* X86_TUNE_USE_GATHER: Use gather instructions. */ DEF_TUNE (X86_TUNE_USE_GATHER, "use_gather", ~(m_ZNVER | m_GENERIC)) /* X86_TUNE_AVOID_128FMA_CHAINS: Avoid creating loops with tight 128bit or smaller FMA chain. */ DEF_TUNE (X86_TUNE_AVOID_128FMA_CHAINS, "avoid_fma_chains", m_ZNVER) /* X86_TUNE_AVOID_256FMA_CHAINS: Avoid creating loops with tight 256bit or smaller FMA chain. */ DEF_TUNE (X86_TUNE_AVOID_256FMA_CHAINS, "avoid_fma256_chains", m_ZNVER2 | m_ZNVER3) /*****************************************************************************/ /* AVX instruction selection tuning (some of SSE flags affects AVX, too) */ /*****************************************************************************/ /* X86_TUNE_AVX256_UNALIGNED_LOAD_OPTIMAL: if false, unaligned loads are split. */ DEF_TUNE (X86_TUNE_AVX256_UNALIGNED_LOAD_OPTIMAL, "256_unaligned_load_optimal", ~(m_NEHALEM | m_SANDYBRIDGE | m_GENERIC)) /* X86_TUNE_AVX256_UNALIGNED_STORE_OPTIMAL: if false, unaligned stores are split. */ DEF_TUNE (X86_TUNE_AVX256_UNALIGNED_STORE_OPTIMAL, "256_unaligned_store_optimal", ~(m_NEHALEM | m_SANDYBRIDGE | m_BDVER | m_ZNVER1 | m_GENERIC)) /* X86_TUNE_AVX256_SPLIT_REGS: if true, AVX256 ops are split into two AVX128 ops. */ DEF_TUNE (X86_TUNE_AVX256_SPLIT_REGS, "avx256_split_regs",m_BDVER | m_BTVER2 | m_ZNVER1) /* X86_TUNE_AVX128_OPTIMAL: Enable 128-bit AVX instruction generation for the auto-vectorizer. */ DEF_TUNE (X86_TUNE_AVX128_OPTIMAL, "avx128_optimal", m_BDVER | m_BTVER2 | m_ZNVER1) /* X86_TUNE_AVX256_OPTIMAL: Use 256-bit AVX instructions instead of 512-bit AVX instructions in the auto-vectorizer. */ DEF_TUNE (X86_TUNE_AVX256_OPTIMAL, "avx256_optimal", m_CORE_AVX512) /*****************************************************************************/ /* Historical relics: tuning flags that helps a specific old CPU designs */ /*****************************************************************************/ /* X86_TUNE_DOUBLE_WITH_ADD: Use add instead of sal to double value in an integer register. */ DEF_TUNE (X86_TUNE_DOUBLE_WITH_ADD, "double_with_add", ~m_386) /* X86_TUNE_ALWAYS_FANCY_MATH_387: controls use of fancy 387 operations, such as fsqrt, fprem, fsin, fcos, fsincos etc. Should be enabled for all targets that always has coprocesor. */ DEF_TUNE (X86_TUNE_ALWAYS_FANCY_MATH_387, "always_fancy_math_387", ~(m_386 | m_486 | m_LAKEMONT)) /* X86_TUNE_UNROLL_STRLEN: Produce (quite lame) unrolled sequence for inline strlen. This affects only -minline-all-stringops mode. By default we always dispatch to a library since our internal strlen is bad. */ DEF_TUNE (X86_TUNE_UNROLL_STRLEN, "unroll_strlen", ~m_386) /* X86_TUNE_SHIFT1: Enables use of short encoding of "sal reg" instead of longer "sal $1, reg". */ DEF_TUNE (X86_TUNE_SHIFT1, "shift1", ~m_486) /* X86_TUNE_ZERO_EXTEND_WITH_AND: Use AND instruction instead of mozbl/movwl. */ DEF_TUNE (X86_TUNE_ZERO_EXTEND_WITH_AND, "zero_extend_with_and", m_486 | m_PENT) /* X86_TUNE_PROMOTE_HIMODE_IMUL: Modern CPUs have same latency for HImode and SImode multiply, but 386 and 486 do HImode multiply faster. */ DEF_TUNE (X86_TUNE_PROMOTE_HIMODE_IMUL, "promote_himode_imul", ~(m_386 | m_486)) /* X86_TUNE_FAST_PREFIX: Enable demoting some 32bit or 64bit arithmetic into 16bit/8bit when resulting sequence is shorter. For example for "and $-65536, reg" to 16bit store of 0. */ DEF_TUNE (X86_TUNE_FAST_PREFIX, "fast_prefix", ~(m_386 | m_486 | m_PENT | m_LAKEMONT)) /* X86_TUNE_READ_MODIFY_WRITE: Enable use of read modify write instructions such as "add $1, mem". */ DEF_TUNE (X86_TUNE_READ_MODIFY_WRITE, "read_modify_write", ~(m_PENT | m_LAKEMONT)) /* X86_TUNE_MOVE_M1_VIA_OR: On pentiums, it is faster to load -1 via OR than a MOV. */ DEF_TUNE (X86_TUNE_MOVE_M1_VIA_OR, "move_m1_via_or", m_PENT | m_LAKEMONT) /* X86_TUNE_NOT_UNPAIRABLE: NOT is not pairable on Pentium, while XOR is, but one byte longer. */ DEF_TUNE (X86_TUNE_NOT_UNPAIRABLE, "not_unpairable", m_PENT | m_LAKEMONT) /* X86_TUNE_PARTIAL_REG_STALL: Pentium pro, unlike later chips, handled use of partial registers by renaming. This improved performance of 16bit code where upper halves of registers are not used. It also leads to an penalty whenever a 16bit store is followed by 32bit use. This flag disables production of such sequences in common cases. See also X86_TUNE_HIMODE_MATH. In current implementation the partial register stalls are not eliminated very well - they can be introduced via subregs synthesized by combine and can happen in caller/callee saving sequences. */ DEF_TUNE (X86_TUNE_PARTIAL_REG_STALL, "partial_reg_stall", m_PPRO) /* X86_TUNE_PROMOTE_QIMODE: When it is cheap, turn 8bit arithmetic to corresponding 32bit arithmetic. */ DEF_TUNE (X86_TUNE_PROMOTE_QIMODE, "promote_qimode", ~m_PPRO) /* X86_TUNE_PROMOTE_HI_REGS: Same, but for 16bit artihmetic. Again we avoid partial register stalls on PentiumPro targets. */ DEF_TUNE (X86_TUNE_PROMOTE_HI_REGS, "promote_hi_regs", m_PPRO) /* X86_TUNE_HIMODE_MATH: Enable use of 16bit arithmetic. On PPro this flag is meant to avoid partial register stalls. */ DEF_TUNE (X86_TUNE_HIMODE_MATH, "himode_math", ~m_PPRO) /* X86_TUNE_SPLIT_LONG_MOVES: Avoid instructions moving immediates directly to memory. */ DEF_TUNE (X86_TUNE_SPLIT_LONG_MOVES, "split_long_moves", m_PPRO) /* X86_TUNE_USE_XCHGB: Use xchgb %rh,%rl instead of rolw/rorw $8,rx. */ DEF_TUNE (X86_TUNE_USE_XCHGB, "use_xchgb", m_PENT4) /* X86_TUNE_USE_MOV0: Use "mov $0, reg" instead of "xor reg, reg" to clear integer register. */ DEF_TUNE (X86_TUNE_USE_MOV0, "use_mov0", m_K6) /* X86_TUNE_NOT_VECTORMODE: On AMD K6, NOT is vector decoded with memory operand that cannot be represented using a modRM byte. The XOR replacement is long decoded, so this split helps here as well. */ DEF_TUNE (X86_TUNE_NOT_VECTORMODE, "not_vectormode", m_K6) /* X86_TUNE_AVOID_VECTOR_DECODE: Enable splitters that avoid vector decoded forms of instructions on K8 targets. */ DEF_TUNE (X86_TUNE_AVOID_VECTOR_DECODE, "avoid_vector_decode", m_K8) /*****************************************************************************/ /* This never worked well before. */ /*****************************************************************************/ /* X86_TUNE_BRANCH_PREDICTION_HINTS: Branch hints were put in P4 based on simulation result. But after P4 was made, no performance benefit was observed with branch hints. It also increases the code size. As a result, icc never generates branch hints. */ DEF_TUNE (X86_TUNE_BRANCH_PREDICTION_HINTS, "branch_prediction_hints", 0U) /* X86_TUNE_QIMODE_MATH: Enable use of 8bit arithmetic. */ DEF_TUNE (X86_TUNE_QIMODE_MATH, "qimode_math", ~0U) /* X86_TUNE_PROMOTE_QI_REGS: This enables generic code that promotes all 8bit arithmetic to 32bit via PROMOTE_MODE macro. This code generation scheme is usually used for RISC targets. */ DEF_TUNE (X86_TUNE_PROMOTE_QI_REGS, "promote_qi_regs", 0U) /* X86_TUNE_EMIT_VZEROUPPER: This enables vzeroupper instruction insertion before a transfer of control flow out of the function. */ DEF_TUNE (X86_TUNE_EMIT_VZEROUPPER, "emit_vzeroupper", ~m_KNL)